COVID 19 Antigen Self Test Antigen Nasal/Saliva Rapid Test

Short Description:

 

Used For  COVID 19 Antigen Self Test  Antigen Nasal/Saliva Rapid Test
Specimen Saliva/Nasal/Sputum
Certification PEI/Bfarm
MOQ 1000 test kits
Delivery time 1 week after Get payment
Packing 1 test kits/Packing box,5 test kits/Packing box,20 test kits/Packing box
Test Data Over 95% Sensitivity and Specificity
Shelf Life 2 years
Production Capacity 1 Million/Week
Payment T/T, Western Union, Paypal

 


Product Detail

Product Tags

 COVID 19 Antigen Self Test  Antigen Nasal/Saliva Rapid Test

 

INTENDED USE

 

COVID 19 Antigen Self Test  Antigen Nasal/Saliva Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of novel coronavirus SARS-CoV-2 in human throat and nasal secretions, and saliva specimen.This product is intended for self-testing.

COVID Antigen test

Brief Introduction

COVID 19 Antigen Self Test  Antigen Nasal/Saliva Rapid Test  is for detection of SARS-CoV-2 antigens. Anti-SARS-CoV-2 monoclonal antibodies are coated in the test line and conjugated with the colloidal gold. During testing, the specimen reacts with the anti-SARS-CoV-2 antibodies conjugate in the test strip. The mixture then migrates upward on the membrane chromatographically by capillary action and reacts with another Anti-SARS-CoV-2 monoclonal antibodies in the test region. The complex is captured and forming a colored line in the Test line region.

COVID 19 Antigen Self Test  Antigen Nasal/Saliva Rapid Test contains anti-SARS-CoV-2 monoclonal antibodies conjugated particles and another anti-SARS-CoV-2 monoclonal antibodies are coated in the test line regions.

Antigen test COVID Antigen testCOVID Antigen test kit

SPECIMEN COLLECTION AND PREPARATION

The SARS-CoV-2 Antigen Rapid Test (COVID- 19 Ag) can be performed using throat secretions and nasal secretions.
• Throat Secretions: Insert the sterile swab into the throat. Gently scrape the secretions around the wall of pharynx.
• Nasal Secretions: Insert the sterile swab into the deep nasal cavity. Gently rotate swab against wall of turbinate for several times. Make the swab wet as much as possible.
• Saliva: Take a specimen collection container. Make a “Kruuua” noise from the throat, to get out the saliva or sputum from the deep throat. Then spit saliva (about 1-2ml) into the container. Morning saliva is optimal for saliva collection. Do not brush the teeth, eat food or drink before collection the saliva specimen.
• Collect 0.5ml of assay buffer and place into a specimen collection tube. Insert the swab into the tube and squeeze the flexible tube to extrude the specimen from the head of the swab. Make the specimen resolved in the assay buffer sufficiently. Add the crystal tip onto the specimen collection tube. If saliva specimen, suck the saliva from the container and place 5 drops (approx.200ul) of the saliva into the sample collection tube.
The assay should be performed immediately in 2 hours after the specimen preparation.

Antigen self testing

TEST PROCEDURE

Allow the test device, specimen, buffer, and/or controls to equilibrate to room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening. Remove the test device from the sealed pouch and use it as soon as possible.
2. Place the test device on a clean and horizontal surface. Reverse the specimen collection tube, extrude 3 drops of the prepared specimen into the specimen well (S) of the test cassette and start the timer.
See illustration below

Antigen Self Test

3. Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret the result after 15 minutes.

INTERPRETATION OF RESULTS

COVID Self Test

- Positive (+): Two colored lines appear. One colored line should always appear in the control line region (C) and another line should be in the T line region.
*NOTE: The intensity of the color in the test line regions may vary depending on the concentration of SARS-CoV-2 present in the specimen. Therefore, any shade of color in the test line region should be considered positive and recorded as such.
- Negative (-): One colored line appears in the control line region (C). No line appears in the T line region.
- Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
Advice: If the result is positive, it is suggested to go to the nearest hospital for a confirmative check.

If the test result is negative or doubtful, it is suggested to consult a professional and repeat the testing under the help of a professional.
False positive or false negative is of low level but might happen occasionally. It is usually caused by improper operation to the assay.
Please go to a professional for help if you could not run the assay properly.

FAQ

Q:Are your company a trading one or a factory?

A:Factory + trade (integration),More than 10 years focusing on veterinary Test Kits.

Q:After an order is placed, when to deliver?

A:Generally about 3-7 days, If we have inventory, we can arrange shipment within 3 days. Please be aware that our production lead times depend on specific items and item quantities.

Q:What about the warranty with after – sales services?

A:The testing kits is guaranteed for 18 months

 



  • Previous:
  • Next:

  • Write your message here and send it to us